High-rise buildings have large windows, and cleaning them requires specialized equipment, as well as a greater awareness of safety. The best time to clean high-rise windows is when the temperature is lower. Then, you can use a rag, towel, or power washer to clean the glass from the outside.
Squeegee
High-rise buildings require special attention to cleaning the windows. According to the 1968 Building Code, a high-rise building is any structure over 75 feet high. The measurement is made starting from the lowest fire department entry level and ending at the highest occupied floor. Over the years, this definition has changed, but there is one constant: high-rise buildings require specialized window cleaning equipment and personnel.
To clean high-rise windows, you need to know how to handle a squeegee. The squeegee should be held with the handle in the right hand with your thumb about halfway between the top and side. The handle should be at an angle of 0 degrees when it touches the window and 90 degrees when it is lifted.
Once you have the correct technique, you should start by cleaning the top half of the window. Once you have removed most of the water, move over slightly and repeat the process. You should continue this process until all the water is removed. A more advanced squeegee technique involves fanning the blade in different directions to remove excess water.
Rags
You can clean high-rise windows with rags if you don’t want to risk damaging them with a cleaning solution. These rags are a great way to remove excess dirt, grease, and debris. In the past, you may have used towels, but they didn’t do a very good job, and they left a lot of lint behind. But now, you can use rags for the initial cleaning, as well as the polishing.
When you use rags, you should always make sure that the rags are dry before you use them to clean your windows. This will prevent streaks. Also, it’s important to wash the rags after using them to clean them. Some rags may contain rough fibers that can scratch the glass. Newspapers can also work, but you should remember that they can leave ink stains on the window frames.
You can also use microfiber cloths to clean high-rise windows. Microfiber cloths are highly absorbent and durable. Moreover, they’re reusable. Microfiber towels come in a variety of colors, including blue and green. They’re also well-sized to be used on bigger windows.
Beach towel
A microfiber cloth works well for removing water marks from the glass. The advantage of microfiber cloth is that it can be easily cleaned in the washing machine. A professional cleaner typically uses one cloth for a single house, while beginners may need more. For stubborn dirt, use a scouring pad or sponge.
When you clean high rise windows, you will need different tools than those you would use at home. At home, you can use a cloth or a squeegee, but when you clean the windows in high-rise buildings, you will need window cleaning detergent, a bucket of soapy water, and plenty of elbow grease.
Bath towel
Bath towels are an excellent option for cleaning high rise windows. They are very absorbent and are relatively inexpensive. Regular sized cotton towels also work well, provided you remove any lint and wash them thoroughly. Another option is to use a washcloth or hand towel, which can be used to wipe off the water and other debris that may have fallen on the windows.
Once you’ve soaked the windows and wiped off the excess water and cleaning solution, you can use a dry squeegee to clean the frames. Start at the top of the window and squeegee down in soft streaks. Afterward, wipe the window frames dry with a soft cloth.
If you have small children, you can also try using a simple solution of vinegar and water, or even your own household cleaning solution. This solution is ideal for cleaning windows and will leave them streak-free and shiny.
Cleaning with a squeegee
When cleaning with a squeegee, you can avoid streaks and buildup by using the right tool. You can use a microfiber cloth for this type of cleaning and avoid using paper towels because paper leaves lint film on glass windows. You can also use a broom to remove any cobwebs or sticks that may be hanging on your window frames.
While working on high rise windows, be sure to wear safety gear and use a ladder. You should also use a high-quality squeegee and paper towels to clean the glass. If you have a friend to help you, get them to hold the ladder securely. Then, use a squeegee to remove any dirt or grime from the windows and dry them thoroughly. Be aware that squeegees tend to wear down over time, so make sure to replace them after a while.
Keeping high rise windows clean is particularly important if you live in an area that has high traffic. During rainy weather, the windows on skyscrapers can get more stained, so cleaning regularly is crucial.
Using a squeegee
A microfiber cloth or a broom is essential for streak-free windows. Paper towels leave lint on glass windows and are not ideal for window cleaning. Brooms also remove cobwebs and stick marks from around the window frames.
A squeegee should be held at an angle so that it contacts the top portion of the window. Next, move the squeegee down in a downward motion, aiming for the dirty corners. Wipe off the squeegee with a dry cloth after each stroke. In case of stubborn dirt, use a scouring pad or sponge to wipe it off.
A squeegee should be held in the right hand. The thumb should be positioned halfway between the top and the side of the squeegee. Using a squeegee, the angle of the squeegee should be 45 degrees. It should be able to reach the corners of the windows without scratching them.
Using a power washer
High-rise window cleaning requires special skills and experience. You need to know how to access the windows safely and which cleaning solution to use, among other things. Hiring a professional window cleaning company will not only give you a clean building, but also keep your property value high.
There are some precautions you need to take before using a power washer to clean high-rise windows. The water from the machine can break glass and damage exposed wood. It can also dilute soap chemicals. Therefore, it is important to read the instructions and manual carefully before operating the machine. Also, always be sure to use the lowest pressure setting and follow the manufacturer’s directions. The pressure should be between 1,200 and 2,000 PSI.
Before starting the cleaning process, you need to add the soap to the washer reservoir. After that, the wand with the soaping tip issues a lower-pressure stream of solution. Make sure to aim the stream at a 45-degree angle to the window so that it can effectively clean the glass. Aiming for a 45-degree angle allows you to reach corners of the window without hitting the sill.
